N64 W23110 Main Street
Sussex, WI 53089
414.566.7263
877.702.5254
Take I-94 West toward Madison.
Exit County F (formerly Hwy. 164) in Waukesha.
Make a right turn off the exit ramp, heading north on County F for about 5 miles. Note: At the Capitol Drive overpass, County F changes its name to Hwy. 74. Once in Sussex, turn right at Hwy. 74. After crossing the railroad tracks, you'll see QuadTech on the left, Quad on the right.
The Machine Shop entrance is the second (last) entrance on the left. Once on entrance drive around the back of the building to the NW corner.
Enter the building through the North West corner glass doors.
Exit airport to I-94 West.
Immediately move into one of the two left lanes of I-94 to take the 894 West bypass toward Madison.
Exit on I-94 West toward Madison.
Take I-94 to Waukesha and exit County F (formerly Hwy. 164). Make a right turn off the exit ramp, heading north on County F for about 5 miles. Note: At the Capitol Drive overpass, County F changes its name to Hwy. 74.
Once in Sussex, turn right at Hwy. 74. After crossing the railroad tracks, you'll see QuadTech on the left, Quad on the right.
The Machine Shop entrance is the second (last) entrance on the left. Once on entrance drive around the back of the building to the NW corner.
Enter the building through the North West corner glass doors.
Take Hwy. 41/45 South and exit Hwy 74 West (Main St.) and travel west about 10 miles.
About 1 mile after passing through the roundabout , turn right at the stop to stay on Hwy 74. The entrance to the machine shop is on the right, just before the QuadTech plant on the right.
Once on entrance drive around the back of the building to the NW corner.
Enter the building through the North West corner glass doors.
Take I-94 East toward Milwaukee.
Exit County F (formerly Hwy. 164) in Waukesha.
Make a left turn off the exit ramp, heading north on County F for about 5 miles. Note: At the Capitol Drive overpass, County F changes its name to Hwy. 74.
Once in Sussex, turn right at Hwy. 74. After crossing the railroad tracks, you'll see QuadTech on the left, Quad on the right.
The Machine Shop entrance is the second (last) entrance on the left. Once on entrance drive around the back of the building to the NW corner.
Enter the building through the North West corner glass doors.
555 South 108th Street
West Allis, WI 53214-1145
414.566.3290
877.702.5254
Exit airport to I-94 West
Immediately move into one of the two left lanes of I-94 to take the 894 West bypass toward Madison.
Exit on Greenfield Road, turning left onto Greenfield.
At the intersection of Greenfield Road and Hwy. 100 (also known as 108th Street), turn right, heading north on
Hwy. 100. (There is a stop light at this intersection.)
Stay in the left lane, and turn left at the next stop light, which is the intersection of Hwy. 100
and Theodore Trecker Way. (There is a stop light at this intersection, and a gas station on the left.)
Turn right into the third driveway (Gate 3) off Theodore Trecker Way.
Follow the “fabrication shop” signs to the Steel building north of the main plant. The Fab shop is located
in the west half of the steel building.
Take Hwy. 45 South (The highway becomes 894 after it passes over I-94), and exit at Greenfield.)
Turn right off Greenfield, heading west until the intersection at Hwy. 100 (also known as 108th Street). Look for a
Walgreens and a stop light at this intersection.
Turn right onto Hwy. 100, and stay in the left lane.
Turn left at the intersection of Hwy. 100 and Theodore Trecker Way. (There is a stop light at this intersection,
and a gas station on the left.)
Turn right into the third driveway (Gate 3) off Theodore Trecker Way.
Follow the “fabrication shop” signs to the Steel building north of the main plant. The Fab shop is located
in the west half of the steel building.
OR
Take Hwy. 43 South to I-94 West
Exit Hwy. 100 South, which is the second Hwy. 100 exit.
Turn right at the second traffic light.
Turn right into the third driveway (Gate 3) off Theodore Trecker Way.
Follow the “fabrication shop” signs to the Steel building north of the main plant. The Fab shop is located
in the west half of the steel building.
Take I-94 East and exit Hwy. 100 South.
Turn right off the exit and proceed to the first stop light, which is Theodore Trecker Way.
Turn right into the third driveway (Gate 3) off Theodore Trecker Way.
Follow the “fabrication shop” signs to the Steel building north of the main plant. The Fab shop is located
in the west half of the steel building.
Take I-94 West and exit Hwy. 100 South.
Turn right off the exit and proceed to the first stoplight, which is Theodore Trecker Way.
Turn right on Theodore Trecker Way.
Turn right into the third driveway (Gate 3) off Theodore Trecker Way.
Follow the “fabrication shop” signs to the Steel building north of the main plant. The Fab shop is located
in the west half of the steel building.